Using Your Machine - Vax RAPID POWER 2 Manual

USING YOUR MACHINE

Filling the solution tank
IMPORTANT: Screw the solution tank cap tightly when refitting. Do not leave the solution stored in the tanks between uses.
Unused solution can be poured back into the bottle.
Pull up the solution tank
and lift to remove.
To replace, slide and push
the solution tank firmly
into the machine.
Filling the clean water tank
Pull and lift to remove the
clean water tank.
Twist the solution tank cap
anti clockwise and remove.
Twist the clean water
tank cap anti clockwise
and remove.
Fill the solution tank with the
Vax carpet cleaning solution.
40°C
MAX
Fill the clean water tank
with warm water (max
40�C). Replace the cap and
twist clockwise to tighten.
Twist the solution tank cap
clockwise until tight.
To replace the clean water
tank, align the back of the
clean water tank with the
body of the machine. Slide
it down and press firmly
into place.
9