Vax RAPID POWER 2 Manual page 12

USING YOUR MACHINE
Using the hose and tools
IMPORTANT: The machine should be in the upright position when using the hose and tools; this will de-activate the brushes.
Do not over saturate the carpet/surface. Always finish with dry strokes (trigger released) and continue using dry strokes
(trigger released) until little water is visibly passing through the tool/nozzle.
SpinScrub Hand Tool
For targeting stains and
stubborn marks.
Lift the hose connection
port cover.
Plug the machine into the
mains and press the
On/Off pedal to switch on.
12
Pet Tool
For cleaning up after pets.
Firmly push the hose end
into the hose connection
port.
Press the trigger on the
forward stroke to release
water/solution.
Release the trigger on the
backward stroke to pick up
water/solution. For a dryer
finish continue using dry
strokes (trigger released)
until little water is visibly
passing through the tool.
Upholstery Wash Tool
For use on upholstery and
carpeted stairs.
Select a tool. Slide the tool over the tab at the end of the
hose until it clicks into place.
Crevice Tool
For use in tight spots,
hard to reach areas and
edge cleaning such as
against skirting boards.