Table of Contents
Advertisement
Figure 41 - The node succesfully join the network
• From the MQTT server it is possible to send commands to control the RGB
led on Tiger board. On the SubTopic topic the server must publish a
message with the following structure:
{eui:"BoardEUI",pay:{led:{r:redval,g:greenval,b:blueval}}}
Where BoardEUI is the Tiger board unique ID, redval/blueval/greenval =
0/1 is the value of the corresponding led (1 ON, 0 OFF). As an example,
the message:
{eui:"006037FF5E989166",pay:{led:{r:1,g:0,b:0}}}
will switch on the red led and switch off the green and blue led.
8.5. AT bridge application
TODO
Doc: MC27561 Tiger User's Guide, Rev 1.0
44
Document
MC27561 Tiger – User's Guide
04/02/2018
41 of
Advertisement
Table of Contents
