At Bridge Application Code - Arrow MC27561-TIGER User Manual

AT bridge application code

TODO...
8.3. Setup the environment
The procedure to setup the MQTT demo is explained herein after. The procedure
for the AT bridge application is almost the same.
• Download the Tiger Board MQTT Demo code (see paragraph 8.2).
• Put the code in the folder c:\NXP_Tiger. Here you should also create the
folder c:\NXP_Tiger\workspace.
Doc: MC27561 Tiger User's Guide, Rev 1.0
44
Document
MC27561 Tiger – User's Guide
Figure 28 - MQTT Demo system overview
04/02/2018
33 of