Figure 40 - Get Node Unique Id - Arrow MC27561-TIGER User Manual

unique ID (MAC address). The board will reply with a 64 bits code.
• From the MQTT server send the following message in the SubTopic topic:
{"cmd":"add","id":"006037ff5e989166"}.
Please note that in this message the "id" field must be filled with the
correct eui value as determined in the previous step.
• The Tiger board is now commissioned and can join the Thread network.
From the console type "thr join", In case of success the board reply should
be as in the Figure 41. The Tiger board should now start to send messages
to the MQTT server, on the PubTopic topic. These messages will have the
following format:
{"eui":"006037FF5E989166",
"Ax":"0.003",
"Ay":"-0.030",
"Az":"1.008",
"Mx":"1",
"My":"-16",
"Mz":"54",
"dpsx":"1.352",
"dpsy":"-5.438",
"dpsz":"-0.023",
"temperature":"28.250"
}
Doc: MC27561 Tiger User's Guide, Rev 1.0
44
Document
MC27561 Tiger – User's Guide

Figure 40 - Get Node Unique ID

//Unique ID
//Acceleration on x [g]
//Acceleration on y [g]
//Acceleration on z [g]
//Magnetic flux on x [uT]
//Magnetic flux on y [uT]
//Magnetic flux on z [uT]
//Degrees per second on x
//Degrees per second on y
//Degrees per second on z
//Temperature
04/02/2018
40 of