Getting Started With Kw41; Tools; Software; Mqtt Demo Application Code - Arrow MC27561-TIGER User Manual

8. Getting Started with KW41

8.1. Tools

• MCUXpresso IDE (can be downloaded from:
https://www.nxp.com/support/developer-resources/software-
development-tools/mcuxpresso-software-and-tools/mcuxpresso-
integrated-development-environment-ide:MCUXpresso-IDE).
• DAP Link board (or SEGGER j-link with 10 pins adapter connector)
• Other tools may be required depending on the software running on KW41
(see next paragraph).

8.2. Software

Two different software packages can be downloaded from ????????.

• MQTT Demo application code

• AT bridge application code
MQTT Demo application code
In addition to the Tiger board and the tools already listed in paragraph 8.1, this
demo needs:
• sensor board MCS27561-SH-NXP, equipped with a 6-axis sensor with
integrated linear accelerometer and magnetometer (FXOS8700CQ), a 3-
Axis Low-Power Accelerometer (FXLS8972CF), a 3-Axis Digital Angular
Rate Gyroscope (FXAS21002C), a digital temperature sensor (PCT2075),
RGB led and user buttons.
• i.MX6UL Modular Gateway kit from Volansys.
• FTDI cable connected from J12 to the PC, to have a serial connection
between PC and KW41 (baud rate 115200, data bits 8, stop bits 1, parity
none).
In this application the Tiger board is Thread connected with a Modular Gateway
from Volansys. By means of this gateway, the Tiger board can send to an MQTT
server the sensors readings and receive commands from the server (see Figure
28).
Doc: MC27561 Tiger User's Guide, Rev 1.0
44
Document
MC27561 Tiger – User's Guide
04/02/2018
32 of