Advertisement
ly disengaged. The same thing occurs if run/stop — restore is
pressed or if a 'BRK' is executed. To re-engage MACH 5
LOADER, type SYS 57013.
To disable BASIC + 4K, turn the computer off and then on again.
NOTE: Most compiled programs have memory conflicts and will
not work properly with BASIC+ 4K.
DISK ORGANIZER
(REQUIRES MACH 5 CARTRIDGE & DISK)
MACH DISK ORGANIZER is a very useful disk file management
system designed to assist you in cataloging your program disks
and the files contained on them. Once disks have been catalog
ed by the system, the information is stored on a data disk.
Disk Organizer offers you a variety of ways to display this in
formation on the screen, print it on any properly interfaced
80-column printer or search for specific files.
Disk Organizer maintains some very useful information about
the files stored on your disk. It keeps track of the file name, the
disk it is located on, the size of the file, what type of file it is and
even it's location by track and sector on it's disk!
GETTING STARTED . . .
Insert the MACH 5 DISK into your disk drive and type /DISV
When the computer responds with "Ready", type RUN.
(NOTE: MACH 5 CARTRIDGE MUST BE INSTALLED TO USE
THE DISK ORGANIZER.)
USING 1 or 2 DISK DRIVES . . .
Disk Organizer allows you to use two disk drives for catalog
ing. The drive for accessing the data disk must always be device
#8. You can use a disk drive with device #9 thru 11 as the drive
that reads the directories of the disk you are going to catalog.
You must specify the device # for your 2nd drive each time you
load the program.
Advertisement
