Advertisement
CARTRIDGE FAST LOADER
NOTE: MACH 5 is designed for use with the Commodore 64tm
and 1541 tm disk drive.
SETUP
1. Make sure that your computer is turned off before inserting
or removing your MACH 5 CARTRIDGE.
2. Insert the MACH 5 CARTRIDGE into the cartridge slot on
your computer.
3. Turn on your Disk Drive and your Computer.
After the computer has been turned on, the words "MACH-5
LOADER ENGAGED!" will be displayed on the screen.
If the above does not occur or if the screen fails to come up,
turn off all equipment and try again, starting with step 1 above.
MENU
Type "-<
M" to display the command menu at any time.
The following commands are
available with
MACH
5
CARTRIDGE.
COMMAND
FUNCTION
$
List a directory on the screen without erasing
the program in memory.
©COMMAND
Send a DOS command to the disk drive
(Ex.@l is the same as OPEN 15,8,15,"!":
CLOSE 15)
/ FILENAME
The same as LOAD "FILENAME", 8
▲ FILENAME
The same as LOAD "FILENAME", 8,1
= FILENAME
The same as SAVE "FILENAME", 8
«•- *
The same as LOAD ":*'\8t1
«- P
The same as OPEN 4,4,7:CMD4 (Print
upper/lower case)
-*- U
The same as OPEN 4,4:CMD4 (Print upper
case/graphics)
«+- C
The same as PRINT#4: CLOSE 4 (Close
Printer)
Advertisement
