Troubleshooting - VOLTCRAFT VC-524 AC/DC Operating Instructions Manual

13 Troubleshooting

The multimeter was designed using the latest technology and is safe to use.
However, problems and malfunctions may still occur.
This section tells you how to troubleshoot common issues:
Always observe the safety information in these instructions.
Error Possible cause
The Are the batteries empty?
multimeter
does not
function
Have you selected the
wrong measurement
The
mode (AC/DC)?
measured
Are the measuring leads
value
plugged into the measur-
does not
ing sockets correctly?
change.
Is the hold function
enabled ("HOLD")?
Any repair work other than that described above must be carried
out by an authorized technician. If you have questions about the
multimeter, please contact our technical support team.
82
Solution
Check the status. Replace the bat-
teries.
Check the display (AC/DC) and select
another mode if necessary.
Check that the measuring leads are in
the correct position.
Press the "HOLD" button to disable
this function.