Troubleshooting - VOLTCRAFT VC-533 Operating Instructions Manual

13. Troubleshooting

The multimeter was designed using the latest technology and is safe to use.
However, problems and malfunctions may still occur.
This section tells you how to troubleshoot common issues:
Always observe the safety information in these instructions.
Error
The multimeter does
not work.
The measured value
does not change.
Any repair work other than that described above must be carried out by an authorized technician.
If you have questions about the multimeter, please contact our technical support team.
Possible cause
Are the batteries empty?
Have you selected the wrong measurement
mode (AC/DC)?
Are the measuring leads plugged into the
measuring sockets correctly?
Is the hold function enabled ("HOLD")?
Solution
Check the status.
Replace the batteries.
Check the display (AC/DC) and select
another mode if necessary.
Check that the measuring leads are in the
correct position.
Press the "HOLD" button to disable this
function.
57