Advertisement
Connect the speakers for audio playback
•
Connect the supplied speaker cables to the Speaker out port on both speakers and the other ends to the R/L
speaker ports on the turntable.
•
Ensure the red cable is plugged into the red port and the black cable is plugged into the black port on both the
speakers and the turntable.
Tips to better performance
•
When opening or closing the turntable cover, handle it gently, moving it either at the center or equally from both sides.
•
Do not touch the stylus tip with your fingers; avoid bumping the stylus on the turntable mat or on the edge of the record.
•
Clean the stylus tip frequently, using a soft brush with a back-to-front motion only.
•
If you use a stylus cleaning fluid, use it very sparingly.
•
Wipe the dust cover and turntable housing gently with a soft cloth. Clean the unit only with a dry, clean cloth.
Do not use liquid or aerosol cleaners.
•
Never apply harsh chemicals or solvents to any part of the turntable system.
•
Prior to moving the turntable, always unplug it from the AC power outlet and fasten the tone arm on the tone arm rest
with the vinyl twist-tie.
OPERATION | 11
Advertisement
