PUSH − BUTTON OPERATION
Allows
call modes.
ment display until DASH
lease the button. Once dash starts flashing, proceed to
next step.
Unit Selection Code for Outdoor Control
Unit Code
64
65
66
67
ment display shows the selected mode and the control performs the selected function.
Figure 19. Push-Button Operation
Table 14.
Outdoor control must be in
IDLE mode (no heating or
cooling operation).
NOTE - See table 7 for explanation of codes.
Push and hold button until mode
_
ment display ( , ,
). Immediately release the button,
proceed to next step.
_
Unit Type
,
or
Unit Model
31-5000750 Rev. 1