Using The Headphone Rotary Encoder; Using The Control Ports - iConnectivity PlayAUDIO 1U User Manual

Using the Headphone Rotary Encoder

Double tap the encoder rapidly to mute all analog outputs on the rear of the PlayAUDIO1U. Double tap again to unmute.
Tap the encoder to select the headphone mix for the currently active Scene.
Turn the encoder slowly to raise or lower the selected headphone mix volume in 0.5 dB increments.

Using the CONTROL ports

Use the PlayAUDIO1U CONTROL ports with compatible footswitch(es) to send CC/PC messages, arm or disarm automatic failover, load
CC / PC,or Toggle scenes
Complete instructions on configuring CONTROL port footswitch actions can be found in our Auracle documentation at
https://www.iconnectivity.com/auracle-x-series
User Guide v2023-001 16