Reconnect A Previously-Connected Device; Clear The Headphone Device List - Bose QUIETCOMFORT ULTRA Manual

RECONNECT A PREVIOUSLY-CONNECTED DEVICE

1. Press the Bluetooth/Power button and release to hear which devices
are connected.
2. Within 2 seconds, press the Bluetooth/Power button and release again to hear the
name of the next device in the headphone device list.
3. Repeat until you hear the correct device name.
You hear a tone that indicates when the device is connected.
TIP: You can also reconnect a previously-connected device using the Bose Music app
(see page 12).
NOTE: If two devices are already connected to the headphones, the
newly-connected device replaces the older of the two connections.

CLEAR THE HEADPHONE DEVICE LIST

1. Press and hold the Bluetooth/Power button and Multi-function button until you
hear "Bluetooth device list cleared. Ready to connect."
2. Delete your headphones from the Bluetooth list on your mobile device.
All devices are cleared, and the headphones are ready to connect.
B LUETO OTH C O NN ECT I ON S
|
3 0 E N G