Table of Contents
Advertisement
St ep 4: Ent ering t he area code (cont inued)
5
Enter three digits of your home area code using the dialing keys.
6
Press (PGM).
You will hear a long confirmation beep.
Notes
• If the home area code is already entered, it appears on the display in step 4. To enter a
different home area code, see "To change the home area code" below.
• Do not allow more than 20 seconds to elapse between each step of the procedure.
Tips
• You may press Jog Dial instead of (PGM) in step 6.
• To check the current home area code, perform steps 1 to 4. The home area code appears on the
display for about 20 seconds.
To change the home area code
1
Perform steps 1 to 4 on page 17.
The current home area code appears on the display.
2
Turn Jog Dial down to erase the current home area code.
3
Enter a new home area code using the dialing keys.
4
Press (PGM).
You will hear a long confirmation beep.
To ent er t he local area code (For 10 digit s phone
num bers users)
If a call matches one of the local area codes you entered, the phone number will be
registered with 10 digits in the Caller ID list (area code + number). If a call does not
match one of the local area codes you entered, the phone number will be registered
with 11 digits in the Caller ID list (1 + area code + number). Some regions of the
country allow you to have more than one local area code. (Up to five local area codes
can be entered in this phone.)
1
Perform steps 1 to 3 on page 17.
2
Turn Jog Dial up to make "LOCAL" flash.
3
Press Jog Dial.
US
18
Getting Started
Downloaded from:
https://www.usersmanualguide.com/
HOME LOCAL
#1 #2 #3 #4 #5
Advertisement
Table of Contents
