NUTRIBULLET ultra User Manual page 3

- Blending causes ingredients
to heat up, which builds
pressure in the Cup over
time. Continuous blending
for more than one minute
may cause the Cup to
separate, exposing the
blade, or expel heated
contents, causing injury.
- DO NOT run for more than
6 consecutive 30-second
intervals to prevent the
contents from overheating
and pressurizing. Allow
contents to settle at least 10
to 15 minutes after running
multiple consecutive
extraction cycles. DO NOT
attempt to open the Cup if
it feels hot or warm to the
touch. See Cup Caution
section for details.
• DO NOT blend anything
carbonated or effervescent
— no bubbles.
- Carbonated and
effervescent ingredients
(e.g., soda, baking powder,
baking soda, yeast, some
batters, cake mix, dry ice,
or other things that become
bubbly) release gasses that
increase pressure. Pressure
from released gases can
cause a sealed nutribullet
Cup to burst, resulting
in possible injury and/or
property damage.
Note: Some protein
powders include
effervescent ingredients.
3
Always check the
ingredients of all
supplements before
• DO NOT overfill.
- Filling above the MAX
line can result in leakage.
The cyclonic action of
the nutribullet requires
®
space to extract effectively.
Exceeding the MAX line
can result in leakage and
may create a dangerous
pressurization which can
cause the Cup and Rapid
Extractor Blade assembly
to separate.
• DO NOT leave blended foods
inside sealed Cup.
- Blended mixtures can spoil
and ferment, increasing
pressure when left inside
the Cup.
- Use the To-Go Lid or transfer
to another container for
storage after blending.
CUP CAUTION:
NEVER attempt to open a
sealed nutribullet Cup if it
®
feels hot or warm to the touch.
The contents may be heated
®
and pressurized, which can
cause the Cup to violently
separate when opened,
potentially resulting in bodily
injury. If the Cup feels
hot or warm,
take the following steps:
adding. 1. LEAVE ALONE, DO NOT
OPEN. Leave the Cup where
it is and do not touch it or
allow another individual to
touch.
disengage the Cup from
the Motor Base or separate
the Cup from the Rapid
Extractor Blade by applying
heat, force, or prying apart
the components, which may
crack or shatter the Cup and
result in bodily injury.
2. Do not continue to blend.
3. Allow the Cup to cool for at
least 30 minutes.
4. After 30 minutes, check if the
Cup is completely cooled. If
still warm, allow to cool more.
5. If cool to the touch, slowly
disengage the Cup from the
Motor Base.
6. With the Cup pointed
away from your face and
body, use a towel to slowly
untwist the Cup from the
Rapid Extractor Blade
and gently release any
residual pressure.
If you are still unable to
remove the Cup from the
Rapid Extractor Blade,
contact Customer Service.
you are unable to untwist the
Cup from the Rapid Extractor
Blade, NEVER
contents out for a prolonged
period of time. The contents
may ferment causing the Cup
to violently separate, which
DO NOT attempt to can result in in bodily injury or
property damage. Dispose of
the Cup and contents properly
so you or others will not be
injured if fermentation causes
the Cup to separate.
CUP SAFETY:
Always make sure the Cup
is securely locked on the
Motor Base before blending.
The motor will not turn on
unless the Cup is set in the
locked position.
• Do not exceed the MAX line.
Exceeding the MAX line can
result in leakage.
• Do not remove the Cup while
the unit is in operation.
• Periodically inspect your
nutribullet
components for damage or
wear that may impair
proper function or create
a safety hazard.
• NEVER
nutribullet
Cup is empty.
If • Do not overfill Cup with ice.
leave the sealed
Ultra blender
®
operate your
Ultra if the
®
4