Function Description - Toshiba 42X3030D Service Manual

Adjusting the Data
Pressing of VOLUME
variable range depends on the adjusting item.
I2C Bus Off
Turn off I2C communication between IC700 and IC400.
1) Press and hold the CALL button on the remote control, then press the Volume
the TV.
2) Display "BUS Off" OSD.
3) I2C communication turned off.
Note:
To return Bus on status, press and hold the CALL button on the remote control, then press the Volume
+ button on the TV again. TV will be turned off and automatically turned on, then status will be Bus
On.
Setting TVOP
Enter to service mode and select menu of TVOP by pressing P
menu. After selecting TVOP, press
TVOP

FUNCTION DESCRIPTION

+/- button will change the value of data in the range from 00H to FFH. The
+ or
or P
- to set I2C check function to disable or enable as below.
1 0 (Normal)
+ button on
during display of adjustment