Toshiba 42X3030D Service Manual page 131

6) Progress status is changed "OK" and power cycle (automatically). Then QA02 initialization has
been completed.
7) Enter the service mode and select version check mode. Confirm if model name and model id set is
correct. If not, repeat steps 1) to 6).
Note:
In case initialization by setting wrong MODEL ID is done, there is a possibility of abnormal display.
8) Set I2C check function of TVOP to enable.
9) Check the picture carefully. If necessary, adjust any adjustment item above.
Perform "Auto tune" on the owner's manual.
MODEL ID (HEX) Model name Panel vendor
0x13 37X3000P
0x14 42X3000P
0x15 37X3030D
0x16 42X3030D
0x17
0x18
0x19
0x20
0x21
0x22
0x23
0x24
0x25
0x26
0x27
0x28
0x29
0x30
0x31
LPL
CMO
LPL
CMO