Component Pump Pressure Control; Control Displays - Titan HELIX 0138010 Operating Manual

Control panel
4.3

compoNeNT pump preSSure coNTrol

Refer to item 2 in section 4. The following items
i
control the pressure of the individual Component
Pumps.
1
MAX
PSI
1
Pressure control knob
2 Component Pump ON/
OFF switch
preSSure coNTrol KNoB SeTTINgS
2
MAX
PSI
1
Minimum pressure setting
2
Black zone – no pressure generation
3 Maximum pressure setting
16
MIN
PSI
2
Adjusts the pump pressure of the
applicable Component Pump when
unlinked. When Component pumps
are linked, the (B) pump pressure
control knob will control the
pressure of both pumps.
Switches the Component Pump ON
and OFF.
MIN
PSI
1
3
4.4

coNTrol DISplAyS

Refer to item 2 in section 4. The graphic below
i
applies to both the Component Pump (A) and
Component Pump (B).
The Control Displays increase the functionality of the applicable
Component Pump.
It consists of a display (1) and four function keys (2). The display
shows various menu screens that allow the user to customize
and monitor sprayer operation using the function keys.
1 SET PSI
ACTUAL PSI
2
When both component pumps are turned
i
ON, the system will automatically link the two
Component Pumps after 10 seconds. This means
the Component Pump (A) control display will be
controlled by the Component Pump (B) control
display. When the component pumps are linked,
the Component Pump (A) control display keys
are disabled and will only be functional when the
two Component Pumps are unlinked (see "Status
Screen").
The pressure control knob overrides the Control
i
Display settings. Anytime the pressure control
knob is turned, the sprayer pressure will change
accordingly.
fuNcTIoN KeyS
The function keys are numbered 1–4. Each key is labeled with
an additional function as well.
#1/menu Key Pressing the #1 key scrolls through the available
menu screens or performs a function described on
the active menu screen.
#2/p Key Pressing the #2 key performs a function described
on the active menu screen or increases a value.
#3/q Key
Pressing the #3 key performs a function described
on the active menu screen or decrease a value.
#4/Select Key
Pressing the #4 key selects the active menu screen
or performs a function described on the active
menu screen.
HELIX
0
0