Multitone RPR 950 Series User Manual page 8

Machine Translated by Google
also vibrate. This alert sequence can be interrupted
at any time by pressing the CANCEL button.
A message ending with the symbol ** is displayed for all
types of calls. Initially, the message is displayed with no
backlight until you press any button.
All messages retrieved from memory will also be
prefixed with either a "timestamp" or a message number,
depending on your system (see also section 7).
Tone-only calls
When used with Multitone MK6/7 code formats, your pager can
receive up to 8 different tone calls, each of which is distinguished
by a distinct beep pattern. For each call received, the
pager displays a dial tone number for the duration of the alert.
If you cancel the alert by pressing the OCR button, the call data
is displayed for an additional 2.5 seconds.
For example, a tone call with a code 3 beep timestamp
received at 12:00 p.m.
Example of a tone call with M number (message):
Calls in alphanumeric message
Your pager can receive alphanumeric messages of up to
120 characters. When you receive a call with an alphanumeric
attachment, if the total length of the message and
timestamp (message time or number) is less than 14
characters, the whole
9261 – 9629 Issue 2
12:00 p.m.
M1 tone call
+
call 3**
+
3**
RPR 950 Series
8