Multitone RPR 950 Series User Manual page 19

Machine Translated by Google
RPR 950 Series
Gently lift
and pull the
battery door out of
the main body in
the direction
shown, being
careful not to
damage the rubber
seal on the edge of
the battery
compartment.
Check that the battery door is extracted from the housing and
remove the door. Remove the battery by placing your index
finger on the positive end and lifting the battery upwards,
simultaneously pushing down a little against the negative
contact spring.
The reverse procedure replaces the battery.
Observing polarity, place the battery against the negative
contact and gently press, simultaneously pushing the
battery into the compartment and snapping the positive
end against the positive contact in the pager.
To replace the battery door, make sure the tab on the bottom
of the door is properly positioned in the opening at the bottom
of the battery compartment and gently lower the door
19
Check that the
valve is correctly positioned
before closing.
9261 – 9629 Issue 2