Pager Status - Multitone RPR 950 Series User Manual

Machine Translated by Google

11. PAGER STATUS

Your pager was designed to provide you with status
information on demand. To activate this feature, press the
OCR button once while the pager is in sleep mode. This results
in the display of the message status>, it is automatically
followed by each programmable status message as
follows:
Status message
1 new post posts
2 new posts
*
Out of reach
*Battery low low.
*Hour
*Mute
*Vibrator
Walk
*Note: For this option to work, your pager must be
programmed to display this message.
9261 – 9629 Issue 2
RPR 950 Series
State
One or more new
Your pager has not received
a valid system signal for at
least 3.5 minutes.
The battery voltage is
Depending on your pager
options, refer to section 12.
The pager is in mute mode.
Vibrate option selected
No other message
to display
14