Table of Contents
Advertisement
Operation
Loading your laundry
The rated washing capacity refers to the largest dry
weight of a load that can be washed.
The thickness, size and type of clothes will influence
the actual capacity.
Do not select more than water level "Mid" for clothes
less than 2.0kg, to avoid splashing of water.
It is recommended that low suds/high efficiency
washing powder is used.
Before washing, please make sure that the water level covers the clothes. Adjust
the number of clothes according to the actual situation.
The clothes load should not exceed the height of the metal drum surface.
Loading detergent
Washing Powder
Softener Inlet
Liquid
Detergent
How to use liquid detergent
tub
1.Prepare warm water (<35°C) in the Inner
2.Add liquid detergent according to the laundry.
3.Press the start button,Dissolve it completely.
4.Press the pause button, Load laundry.
5.Select the appropriate procedures and water
level, and then start washing
How to use softener
The usage and dose of the softener as
per the specifications of softener.
Before washing put the softener into the
detergent box directly.See the above
figure.The softener will put into the
washer when the last rinsing.
After operation, add washing according
to the method of using liquid detergent
agent
'
After the softener is put in,please don
place for a long time otherwise softener
may solidify and cause flowing not
smooth.
How to use washing powder
It is suggested to dissolve detergent before
adding to the tub,see as below:
Adding washing powder Fuzzy Logic Programs
Add washing powder into the detergent
box directly for "Fuzzy logic" programs and
"Delay" program.
Adding washing powder Cotton Wash
It is recommended that washing powder
is dissolved with water and then directly emptied
.
into the washing machine:
1.Add some water (select the"Low" water level)
2.Add washing powder. Run for
about 30 seconds to fully dissolve the
detergent. Then push the"Start/Pause"
button to pause the wash cycle.
3.Load laundry. Select suitable water level.
Push the "Start/Pause" button again to
recommence washing cycle.
If you select "Express" program, it is
recommended to use liquid detergent
instead of washing powder to ensure
the most effective wash results.
Old or poor quality washing powder may
causing caking in detergent dispenser.
Clean the detergent box periodically to
ensure washing power is evenly distributed
and remove any detergent build up.
Note:
If the detergent specified by the manufacturer is
t
not satisfactory washing effect . Then choosing
laundry powder, please give priority to qualified
laundry powder that has passed the test.
8
Operation
Explanation of the display
Mid
Mid
Child Lock function
The function is intended for children safety and preventing the washing program from
accidental changes by children.
Push the Power button,set the desired washing program,after setting, push down
the "Start/Pause" button, then hold the " I " button and "J" button at the same time
for more than 1 seconds.The digital "CL", the child lock. All of the buttons are locked,
and will not function.
To release the child lock function: push down " I " button and "J " button at the same
time for more than 1s. After
one
beep sound, the child lock function is release.
The child lock light goes out.
Note:After the child lock is released, press the Start/Pause button to open the top lid.
If the top lid is forced to open when washing, the machine will alarm E2 and stop running.
The machine will automatically drain after 10 seconds.If you confirm the safety,
please close the top lid and press "Start/Pause" button to wash the clothes.
The machine will continue to operate.
If a separate washing or rinsing process is selected, the washing machine will drain
automatically after operation
I
J
9
Advertisement
Table of Contents
