Advertisement
Quick Links
Returns
If Power is not for you and you'd like to return your shed within 14 days of delivery, then we will collect the item
from you without charging a collection fee. No fuss, no fees!
All we ask is that you do not unpack the shed or take the shed off the pallet. You will be able to see the shed
panels on the pallet if you want to double check the quality of the shed panels.
You need to notify the company you ordered your garden building from to arrange a cancellation or return.
If you have unpacked the shed or taken the shed off the pallet, then you can still return the product to us
providing it is within 14 days of delivery, but you will have to cover the cost of returning the item. This will
either need to be arranging the delivery yourself (to our manufacturing unit in West Yorkshire) or repacking and
securing the goods back onto the pallet and we can arrange a pallet collection for you. The cost of this will depend
on your location and the item bought – please contact us if you would like us to advise the cost of this. In this case
we will not profit from any courier charges but simply pass on the cost we receive to you.
Any delivery surcharges you have paid (such as a quicker delivery, Saturday delivery, or a timed delivery) will not
be refunded.
Once your item has been returned it will be checked to ensure it is complete and in a re-sellable condition. If we
deem that the product is not in a re-sellable condition, we shall deduct a reasonable amount to cover any costs to
use or return them to you.
Where a refund is to be paid, we will usually refund any money received from you using the same method
originally used by you to pay for your purchase.
Contact Us
If you have any queries or issues with your shed then you can:
Check out our FAQ page on www.PowerSheds.com
Email us at
hello@PowerSheds.com
Please provide photographs of any reported issues*
Any replacement parts can take 1-3 working days.
Contact us via the telephone – 01274 036 577 (Mon-Fri 08:00 - 16:30)
Write to us at:
Power Sheds Ltd
21 Commondale Way
Euroway Trading Estate
Bradford
BD4 6SF
On the rare occasion that something is missing or damaged, please contact us to make us
aware so we can send out any replacements. Replacement parts will be dispatched within 1-3
working days.
Please be aware we are unable to reimburse you if you purchase your own materials.
We also cannot compensate for subsequential losses such as installation work.
__________________________________________________
Please follow these instructions to unpack your garden building safely
_______________________________________________________________________________________
Please note – if you have ordered a base kit it's unlikely you will be able to see the base kit from the
outside of the pack - it will be inside your panels. The fixings are also inside the pack.
Page 27
8ft Deep Pent
Instruction Manual
WARNING
UNPACKING SAFELY
Two people minimum to unpack
Place the pallet on firm level ground
Cut the plastic banding
Remove each panel by removing screws one column at a time as indicated below
Be careful of loose components inside the pack when removing panels
Check all the components against the checklist prior to install
BASE KIT AND FIXING PACK
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Power 8ft Deep Pent
Summary of Contents for Power 8ft Deep Pent
- Page 1 Returns 8ft Deep Pent If Power is not for you and you’d like to return your shed within 14 days of delivery, then we will collect the item Instruction Manual from you without charging a collection fee. No fuss, no fees! All we ask is that you do not unpack the shed or take the shed off the pallet.
- Page 2 Power 8ft Deep Pent The staging units are designed to fit our Power Potting Shed window panels (however can be attached to any shed in our range), by being fixed against the internal framing of the shed with the 70mm Product Instructions screws.
- Page 3 Please note: These are 70mm wide and are the same material as the bargeboards. Be careful not to use these during assembly of your Power Shed – These boards are usually taped together. Page 4 – Timber & Base Details ...
- Page 4 USEFUL TIP – Looking for some inspiration? Our Instagram has images of hundreds of Power Sheds which have all been sent to us by customers and is a great Power Sheds Ltd cannot be held responsible for any damage or injury sustained due to incorrect unloading, way to look at the different ways you can build and paint your shed! unpacking, or assembly of any of our products.
- Page 5 (75mm of concrete on top of 75mm of hardcore) or a paving slab base (slabs laid on top of 50mm of sharp sand). Power Base Kit If you have ordered a Power Base Kit the instructions can be found in the small base kit fixing pack. Please scan the QR code to watch our base kit installation video -...
- Page 6 Component Checklist Felt Health and Safety – Use safety goggles when installing the roofing felt. Before laying the felt, you will need to attach the vertcal low side bargeboards. There are 70mm wide boards to go on the edge of the roof on the LOW SIDE ONLY. Use the 40mm galvanised nails to secure.
- Page 7 Make sure the framing on the roof is in line with the framing on the gable top so that the overhang on the front and back is correct. If the framing does not align the base may be very slightly out and the two opposite corners of the floor may need lifting.
- Page 8 70mm screws If you have ordered a Power Base, you will also receive 80mm and 100mm screws. On the rare occasion that not enough screws are provided please contact us to make us aware so we can send more out to yourself. Please be aware we are unable to reimburse if you purchase your own.
- Page 9 Roof Floor Your shed floor will come in a number of 4ft x 4ft panels and for some sizes 4ft x 2ft panels. Please use Depending on the building size you have ordered, your roof panels will be in sections. Please consult your component list to identify your panels.
- Page 10 Front Top & Gables Add the pent front top to the side you want to be the ‘high side’ and screw through the framing, into the panels below with 50mm screws. Note - Please ensure that the 4ft pent top is on top of the 4ft panel and any 2ft pent tops are placed up on the 2ft panels as this will ensure that the cover lats align.
- Page 11 Position another wall panel and secure using the 50mm screws provided. And so on, up to the 20x8 which will be: Use three screws per join. Continue this process until all remaining wall panels are in position. When you have secured all the wall panels (door panel, 2ft and 4ft blank panels, window panels) you then need to secure these to the floor using 70mm screws provided.
- Page 12 As you can see, the floor panels with the full board will be central (so join with the groove of one panel meeting the groove of the joining panel), and the cut board will be to the edge of the building – Continue by positioning one of the 4ft or 2ft panels at a right angle to the 4ft wall panel you have already installed to create the first corner.
- Page 13 The blank panels, door panel and window panels can go in any position. We give you the ‘power’ to choose how you want your shed! Start with the first 4ft panel that will be part of your gable end – position this on top of one of the heavy-duty bearers which you attached in the ‘Floor’...
- Page 14 Once all the floor panels are the correct way up and screwed together, you then need to screw the Door four ‘heavy duty bearers’ which are two pieces of framing joined together, to each gable end (the end where the triangular ‘gable tops’ will go later’). Your building will either come with a single door or a double door depending on what you selected when ordering.
Need help?
Do you have a question about the 8ft Deep Pent and is the answer not in the manual?
Questions and answers