Bosch Professional GCM 305-254 D Original Instructions Manual page 29

If the text of the laser warning label is not in your na-
u
tional language, stick the provided warning label in
your national language over it before operating for the
first time.
Never make warning signs on the machine unrecognis-
u
able.
Do not direct the laser beam at persons or
animals and do not stare into the direct or
reflected laser beam yourself. You could
blind somebody, cause accidents or damage
your eyes.
If laser radiation hits your eye, you must close your
u
eyes and immediately turn your head away from the
beam.
Do not make any modifications to the laser equip-
u
ment. The setting options described in these operating
instructions can be used safely.
Do not let children use the power tool unsupervised.
u
They could unintentionally blind themselves or other per-
sons
Symbols
The following symbols may be important for the operation of
your power tool. Please take note of these symbols and their
meaning. Correctly interpreting the symbols will help you to
operate the power tool more effectively and safely.
Symbols and their meaning
Laser radiation
Do not look directly into the beam
Class 2 consumer laser product
EN 50689:2021
Keep hands away from the cutting area
while the power tool is running. Con-
tact with the saw blade can lead to injur-
ies.
Wear a dust mask.
Wear safety goggles.
Wear hearing protection. Exposure to
noise can cause hearing loss.
Bosch Power Tools
Symbols and their meaning
Danger area! Keep hands, fingers and
arms away from this area.
When transporting the power tool, hold it
only at the locations indicated (recessed
handles) or by the transport handle.
When sawing bevel angles, the adjustable
fences must be pulled outwards or re-
moved completely.
3 601 M49 1.. Take note of the dimensions of the saw
blade. The hole diameter must match the
tool spindle without play. If it is neces-
254 mm 30 mm
sary to use reducers, ensure that the di-
mensions of the reducer are suitable for
3 601 M49 1B.
the base blade thickness and the saw
blade hole diameter, as well as the tool
spindle diameter. Wherever possible, use
the reducers provided with the saw
254 mm 25.4 mm
blade.
The saw blade diameter must match the
information specified on the symbol.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended as a stationary machine for mak-
ing straight cuts in wood with and against the grain. Mitre
angles of –48° to +48° as well as bevel angles of 47° (left-
hand side) to 47° (right-hand side) are possible.
The power tool is designed with sufficient capacity for saw-
ing hardwood and softwood as well as chipboard and fibre-
board.
When using appropriate saw blades, sawing aluminium pro-
files and plastic is also possible.
This product is a consumer laser product in accordance with
EN 50689.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Locking screw for slide device
(2) Slide device
English | 29
1 609 92A 8HX | (23.03.2023)