Setting Auto Initialize - Samsung HG32NJ690F Install Manual

Setting Auto Initialize

Hotel Option (MUTE > 1 > 1 > 9 > SelectE) > Cloning > Setting Auto Initialize
When you clone settings from one TV to another, you clone both the guest side menu and hotel side menu settings:
Picture, Sound, Channel, and Hotel Option menu. This lets you set nearly all of the menu values on your hospitality TVs
to the same, standard settings. If you allow guests access to the guest side menus, for example the Picture menu, they
can change the settings in those menus so they are no longer standard. If you set the Setting Auto Initialize function
to on the TV automatically restores (initializes) any guest-side menu values to the cloned, standard values when the TV
is turned off and then turned on again. Note that Setting Auto Initialize works on cloned guest side menu values only.
Settings which have not been cloned are ignored.
The table below lists the settings that are restored to their cloned values when you set the Setting Auto Initialize
function to on.
• The menu items may not be supported depending on the models.
Picture
Picture Mode
Picture Size
Picture Size Settings Fit to Screen
Zoom and Position
Backlight
Brightness
Contrast
Sharpness
Color
Tint (G/R)
Apply Picture Settings
Expert Settings
Digital Clean View
Auto Motion Plus
Settings
Contrast Enhancer
Film Mode
Color Tone
Menu Item
Auto Motion Plus
Judder Reduction
LED Clear Motion
English - 41