Table of Contents
Advertisement
Hotel Option menu Item
H.Browser Mode
H.Browser Vendor
H.Browser
Solution
URL Launcher Setting
HMS Mode
HMS Server URL Setting
HMS Gateway Role
HMS
HMS HalfTicker Display
Virtual Standby Mode
Virtual
Standby
Reboot Time
Room Number
• Refer to the manual of each solution for details about functions and settings of the solutions such as REACH, HMS,
and H.Browser.
• REACH (Remote Enhanced Active Control for Hospitality) is a professional, interactive remote controller that lets
you deliver TV firmware updates, cloning data, channel mapping changes, REACH contents, and TICKER contents
through RF cable to several hundred hospitality TVs simultaneously. The REACH functions are available only in
Standalone mode. The REACH Server is sold separately. Refer to the REACH Server manual enclosed with the
REACH Server product for more operating information.
Description
You can turn on or off the H.Browser Mode and run the H.Browser Web App.
You can select the H.Browser Vendor.
H.Browser Solution settings menu
• Install Web App: Enter the H.Browser server URL where Web App and sssp_config.
xml files are located.
• Uninstall: You can delete the installed Web App.
• Timeout setting: Set the timeout period for connecting to the URL.
• Developer Mode: If you used Tizen Studio (SDK) for development, you can connect
to the Host PC (which SDK is installed) to use the development tool.
You can turn on or off the HMS Mode. When set to on, the TV can operate with the
HMS server through the IP network.
You can enter the HMS server's address. (Example: https://192.168.1.2:8080)
When there is one TV per room, set to Main.
When there are more than one TVs per room, set the main TV to Main and the others
to Secondary.
Set to on if you want to use the HalfTicker UI.
When set to off, the HalfTicker UI will not be displayed. However, all the hot keys
(except for room control key) on the HMS remote control will work normally without
the HalfTicker UI Display.
When the AC power cord is plugged in and the power is off, this option maintains the
TV's important features even after the screen is off.
• Electricity consumption may vary depending on the environment.
After the TV power is off (in Virtual Standby Mode) if there is no input from the user
within the set Reboot Time, the TV will reboot and enter Virtual Standby Mode again.
You can set the room number of the TV's location.
English - 34
Advertisement
Table of Contents
