Remote Controller Operation Guidance; Control Panel Diagram; Key Operating Instruction - Wellness NE100 User And Service Manual

NOTE:
(1)The above electrical wiring diagrams are only for your reference, please subject the
heat pump to the posted wiring diagram.
(2)The heat pump must be earthed well.Earthing the unit is still required to protect you
against short circuits inside the unit.
Disconnect: A disconnector (circuit breaker, fused or un-fused switch) should be located
within sight of and easily accessible from the unit .This is common practice on
commercial and residential heat pumps. It prevents remotely-energizing unattended
equipment and permits turning off power to the unit while the unit is being serviced.

5.Remote controller operation guidance

5.1. Control Panel Diagram

5.2. Key Operating Instruction

 ON/OFF
Pressing to control system ON / OFF.
In other interfaces, short press
 Select Mode
In the start-on state,press
 Set Temperature
In the start-on state,press
temperature rise adjustment.
12 September 2023/ DH
to exit and return to the main interface.
to change mode : Heating Mode or Cooling Mode.
to set the temperature drop adjustment,press
[Hier eingeben]
to set the
Seite 9 von 26