Advertisement
SUMAKE
Specification:
Free Speed
Air Consumption
Overall Length
Air Inlet (PT)
Air Hose (I.D.)
Air Pressure
Net Weight
SUMAKE INDUSTRIAL CO., LTD
4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91
PNEUMATIC TOOLS
Smart Eraser
ST-M5035
2500 r/min
13 CFM (368 L/min)
8-3/4" (225 mm)
1/4" (6.35 mm)
3/8" (10 mm)
90 psi (6.3 bar)
2.2 lbs (1 kg)
Noise and Vibration:
Vibration
EN ISO 28927-3
Sound Pressure Level
No load: 83 dB(A)
Load:
0.6 m/s²
Sound power level
No load: 94 dB(A)
Uncertainty
²
K= 1.5 m/s
Noise
Remark
EN ISO 15744
Please always
wear ear
protector at
environment
noise level > 80
dB(A) due to
risk of impaired
Uncertainty
hearing!
K= 3dB
ST-M5035-S-1803B-D5F
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Sumake ST-M5035
Summary of Contents for Sumake ST-M5035
- Page 1 > 80 dB(A) due to Air Pressure 90 psi (6.3 bar) risk of impaired Uncertainty Uncertainty hearing! ² K= 1.5 m/s K= 3dB Net Weight 2.2 lbs (1 kg) SUMAKE INDUSTRIAL CO., LTD 4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91 ST-M5035-S-1803B-D5F...
-
Page 2: Ec Declaration Of Conformity
DECLARATION OF CONFORMITY SUMAKE INDUSTRIAL CO., LTD. 4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan declare in sole responsibility that the equipment Equipment： SMART ERASER Model/ Serial No.：ST-M5035 to which this declaration applies, complies with these normative documents: ... - Page 3 Sumake is a manufacturer and exporter of air the tool or the service division of our company. Disconnect the tool before attemping to put a tools since established. We have devote all our Tool drill bit on this tool.
-
Page 4: Parts List
ST-M5035 SMART ERASER PARTS LIST Parts No. Description Q'ty Parts No. Description Q'ty M5035-01 Spindle M5035-18 Spring Pin (Φ3x22) M5035-02 Chuck Spacer M5035-19 Safety Pin Ass'y M5035-03 Bearing Housing M5035-20 Valve Shaft M5035-04 Ball Bearing (6201ZZ) M5035-21 O-Ring (P4) M5035-05... - Page 5 ERASER Original instructions SUMAKE Industrial Co. Ltd.
- Page 6 The tool has been manufactured in conformity with the instruction of EU machine directive. The EU mark will be considered void in the event of inexpert repairs, the use of non-original parts and in case of non-observance of the safety instructions in the user’s manual. Possible direct or indirect consequential damages are not the responsibility of SUMAKE Industrial co., Ltd. General safety rules: Watch the tool at all times when in use.
- Page 7 5. Release the start and stop device in the case of an interruption of the energy supply. 6. Use only lubricants recommended by the manufacturer. 7. Personal protective safety glasses shall be used, suitable gloves and protective clothing are recommended 8.
-
Page 8: Specific Safety Instructions
Specific safety instructions Warnings shall be given about any specific or unusual hazards associated with the use of the power tool. Such warnings shall indicate the nature of the hazard, the risk of injury and the avoidance action to take. General preparation and connection: Before connecting the air hose, apply 4 to 5 drops of SAE#10-20 spindle oil at the air inlet.
Need help?
Do you have a question about the ST-M5035 and is the answer not in the manual?
Questions and answers