Philips FTP2.4A Service Manual page 106

EN 106 8. FTP2.4A AA
Menu-item Subjects
Audio Repro Acoustic System
AVL
Miscellaneous Home Cinema
Integrated RC
Tuner type
P50 DVD menu line
Hotel Mode
Option no. Group 1
Group 2
Store Options
8.4.4 Opt. No. (Option Numbers)
Select this sub menu to set all options at once (expressed in
two long strings of numbers).
An option number (or "option byte") represents a number of
different options. When you change these numbers directly,
you can set all options very quickly. All options are controlled
via eight option numbers.
When the EAROM is replaced, all options will require resetting.
To be certain that the factory settings are reproduced exactly,
you must set both option number lines. You can find the correct
option numbers on a sticker inside the TV set.
Example: The options sticker gives the following option
numbers:
• 62708 08224 00336 00011
• 00022 06416 00128 00066
The first line (group 1) indicates hardware options 1 to 4, the
second line (group 2) indicates software options 5 to 8.
Every 5-digit number represents 16 bits (so the maximum value
will be 65536 if all options are set).
When all the correct options are set, the sum of the decimal
values of each Option Byte (OB) will give the option number.
See next table for the option overview.
Alignments
Options Description
FTV Top Cabinet design (xxPF9986 and xxPF9996 with NXT).
See styling 499 in Product Survey.
Soft Wrap Cabinet design (xxPF9956 and xxPF9966 standard).
See styling 496 in Product Survey.
Wrap Cabinet design (xxPF9956 and xxPF9966 standard).
See styling 500 in Product Survey.
FTV2.3 Cabinet design (for future)
Yes / No Enable / disable Automatic Volume Limiter
Yes / No Model with / without Home Cinema Link (EU only)
Yes / No Control pheripheral equipment via TV IR receiver (EU only)
UV1316 / TEDE9 Model with Philips tuner / Alps tuner
Yes / No Enable / disable DVD control via user menu with TV RC (EU only)
Yes / No Enable / disable Hotel Mode
Group 1 option code overview (see set sticker)
Group 2 option code overview (see set sticker)
<OK> Store options when changed