Bright Control; Tally Lamp - Sony Hyper HAD BVP-750 Operation Manual

INCOM LEVEL control
PEAKING control
Tally lamp
CONTRAST control
Ey BRIGHT control
TALLY switch
ZEBRA switch
AUDIO IND switch
@INCOM LEVEL (intercom level) control
Adjusts the intercom reception level when the
LEVEL/MIC switch on the BVP-750 is set to F/
OFF or the LEVEL switch on the BVP-750P to F.
© PEAKING control
Adjusts the contour of the picture on the
viewfinder for easy focusing. This control does
not affect the signal output from the camera.
© Tally lamp
Lights when a red tally signal is supplied to the
camera. When the CALL button on the MSU-700
or RCP-700-series unit is pressed, the lamp lights
if it is not lit, and goes out if it is lit.
The TALLY switch changes the function and
brightness of the tally lamp.
E Viewfinder stopper
ut) Viewfinder fixing ring
WD Viewfinder fixing lever
Ket
4— RELEASE
SS
SRS
SS
uk) Diopter adjustment ring
W) Viewfinder |
OQ CONTRAST control
Adjusts the contrast of the picture on the
viewfinder screen. This control does not affect the
signal output from the camera.
© BRIGHT control
Adjusts the brightness of the picture on the
viewfinder screen. This control does not affect the
signal output from the camera.
@ AUDIO IND (audio level indication) switch
Turns on and off the audio level indication on the
viewfinder screen.
This switch does not function when the camera is
connected to the CCU-700/700P.
11