Advertisement
System Installation
IMPORTANT
Make sure to place the control box
near a power and water source.
FLUSH THE CITY WATER LINE FOR
3-4 MINUTES BEFORE CONNECTING
TO OUR WATER LINE.
Tools Required
Drill
Misc Drill Bits
Chanel Lock
& Drivers
Adjustable
Screw Drivers
Tube Cutter
Wrenches
Material Required
Teflon Tape
Mount the mist control, air compressor and
1
timer box at the center of the area being
misted on top of the case.
(Other mounting locations can be used.)
Mount the clamp lock into the case ceiling in
3
Pliers
the area to be fogged with the provided screws.
Decide where to mount the clamp lock onto the
2
case ceiling in the area to be fogged - preferably
inside the air curtain (can
also be placed outside of air
curtain).
Air Curtain
OR
Notch the clamp lock near the middle of the case where
4
the hole will be drilled to connect water and air lines.
10
Advertisement
