Set Up A Guest Wifi Network And Captive Portal - NETGEAR SXS80 User Manual

Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80
When you select this option, additional fields display so that you can specify the
RADIUS server. Do the following:
a. In the IP address field, enter the IP address of the RADIUS server to which
the router must connect.
b. In the Port field, enter the port number that the router must use to
communicate with the RADIUS server.
By default, the port number is 1812.
c. In the Shared Secret field, enter the password that the router must use to
communicate with the RADIUS server.
This password must be configured on the RADIUS server. This password is
used to authenticate the router (not a WiFi client) against the RADIUS server.
6. Click the Apply button.
Your settings are saved.
Set up a guest WiFi network and captive
portal
You can set up a guest WiFi network (guest portal), which allows visitors to access the
Internet using a dedicated SSID. You can also set up a captive portal for the guest portal.
With a captive portal, when visitors connect to the guest portal and open a browser to
access the Internet, they are redirected to a splash page where they must agree to the
Terms of Conditions before they can access Internet.
By default, visitors do not need to enter a password to connect to the guest portal and
data is not encrypted. Open access without security might be a good option for a coffee
shop. For situations in which authentication is required, you can use Facebook Wi-Fi or
set a password.
When using this network, visitors cannot see other devices that are connected to the
guest portal (or any other WiFi network on the router) and they cannot access the local
area network (LAN).
Manage the WiFi Settings 83 User Manual