Table of Contents
Advertisement
4·10·4
Monitor Data and Display Order
Table 4·10·4 lists what data are displayed in what order when the sequential
access mode has been obtained by pushing the monitor push·button (PBSI).
Line No. 0 in the table represents the display before the monitor mode is
activated. The number in {
I
indicates the order of data displayed on the
digital indicator in the sequential access mode. Afterdisplaying line No.1· No.
12 data, it returns to the display of line No. 13, which is the original display (No.
0) before the monitor mode.
CAUTION:
If a fault on the inverter is activated, and the cause of the fault is
flickering, the corresponding inverter data can be obtai ned by using
the monitor function. Write the data down to aid in determining the
cause, and how to eliminate the fault, before resetting.
4-18
Advertisement
Table of Contents
