Toshiba CX36F67 Owner's Manual page 42

Hide thumbs Also See for CX36F67:
Table of Contents

Advertisement

Before Calling Service Personnel
Before calling service personnel,
please check the following
chart for a possible cause of the problem
you are experi-
encing. A minor adjustment
on your part may €liminate
the problem
and restore your TV receplion.
Symptoms
i
• No picture,
no sound
• Be sure power cord is plugged
in.
• May be station trouble.
• Check antenna connections.
_ __
.. .
. .
• Check antenna for broken wires.
• No sound, picture OK
• May be station trouble.
• Poor sound, picture OK
Check:
;:;:=:::Adjustments
• Pre=.=s POWER buttc)n.
• Try another channel.
• Check if SPEAKERS ON/OFF function
(page 40) is
properly
set.
• May be station trouble.
• Check antenna connections.
• May be local interference
from an appliance.
• Try 3nother channel.
• Adjust VOLUME.
• Try another channel.
• Adjust VOLUME.
• Adjust BASS, TREBLE, or
BALANCE control.
• Re-orient antenna.
May be local interference
from an appliance.
Check antenna connections.
Check antenna for broken wires.
May be station trouble.
Try
another
channel.
Adjust
BRIGHTNESS.
Adjust
CONTRAST.
Adjust
SHARPNESS.
• Poor pic.Lure, sound OK
Snowy picture
Lines in picture
Distorted
picture
Weak picture
• Poor reception
of broadcast
channels
• No UHF, VHF OK
• Unable to select a certain
channel
0 Multiple
images (ghosts)
• Poor color or No color
• No stereo or SAP sound from a
krtpwn MTS broadcast
• Remote ,ccuqtr01__oes not wo_;k
• Check antenna connections.
• Check antenna for broken wires.
• If VCR is connected,
check TVNCR switch.
• Be sure TV/CABLE function
(page 17) is in "TV"
mode.
• That channel may be locked out with CH LOCK
function
(page 30), or erased with the ADD/
ERASE function
(page 18).
• May be station trouble.
• Check antenna connections.
• May
be station
trouble.
• Check
antenna
connections.
• Check
antenna
for broken
wires.
• May
be local
interference
from
an appliance.
• Check
if station
is broadcasting
in color.
• If you change
the direction
of the TV while
the TV
is activated,
the picture
may
suffer
from
color
shading.
If so, turn
off the TV and allow
to cool
for about
30 minutes,
then
turn
on the TV again.
The picture
should
improve.
• Check if MTS function
is properly
set.
• Re-orient
antenna.
• Try another
channel.
_* Re-orient
antenna.
• Try another channel.
• Re-orient antenna.
• Try another channel.
• Re-orient antenna.
• Adjust TINT.
• Adjust COLOR.
• Change
batteries.
• Check if-FV/CABLE/VCR switch is properly set.
• Be sure power cord is plugged
in.
• Check battery in Remote Control.
42

Advertisement

Table of Contents
loading

Table of Contents