Door Reversal - Zanussi DV 45 Instructions For The Use And Care

Door reversal
BEFORE CARRYING OUT THE
INSTRUCTIONS GIVEN BELOW FOR
REVERSING THE DOOR HINGE FROM
RIGHT TO LEFT, SWITCH THE
FREEZER OFF AND REMOVE THE
PLUG FROM THE WALL SOCKET
(Fig. 5).
1
Gently lay the freezer on its back with
the top held away from the floor by 5-
8cem (2-3 inches) of packing.
2
Remove the bottom door hinge (6)
Remove the freezer door by opening it
and pulling it gently downwards to
remove it from the top hinge pin (38).
4
Unscrew the top hinge pin (3) from the
top hinge (2) and replace it in the
opposite hole on the left hand side.
5
Unscrew the foot at the base (7) of the
appliance and refit it on the opposite
side.
6
Refit the freezer door and the bottom
hinge to the left hand side.
7
Remove the door handle (4) and fit it on
the opposite side by removing the plastic
plugs from the fixing holes and fitting
them in the vacated holes on the
opposite side. (Protect the paintwork
with masking tape).
15