Installation - Hall Technologies SP-HD-4C User Manual

Installation

Preform the following steps to install the SP-HD-4C.
1. Make sure your HDMI Sources and Displays that you are intending to connect are powered off
and disconnected from power sources.
2. Using Hi-speed HDMI cables, connect each display to the Outputs ports of the splitter.
3. Similarly connect the video source to the Input port of the splitter.
4. Power the splitter using the supplied DC power supply.
5. Power on all the displays followed by source.
6. Make sure the LED indicators for the HDMI Input and corresponding HDMI Outputs are
illuminated.
7. Verify audio and video at each output display.
Hall Technologies June 18, 2023
Connection Block Diagram
Page 6 of 10