Table of Contents
Related Manuals for Hall Technologies SP-HD-2B
Summary of Contents for Hall Technologies SP-HD-2B
- Page 1 Hall Technologies • 1234 Lakeshore Dr Suite #150 Coppell, TX 75019 • halltechav.com SP-HD-2B 2-Channel HDMI 2.0 Splitter with Analog and Optical Audio Output USER MANUAL August 7, 2023 Hall Technologies August 7, 2023 Page 1 of 11...
- Page 2 8. Protect the power cord from being walked on or pinched particularly at plugs. 9. Only use attachments / accessories specified by the manufacturer. Refer all servicing to qualified service personnel. Hall Technologies August 7, 2023 Page 2 of 11...
-
Page 3: Table Of Contents
Features ............................4 Package Contents ............................4 Setup ................................4 Installation ............................4 Connectors and Indicators ......................... 5 SP-HD-2B Front ..........................4 SP-HD-2B Back ..........................4 Serial RS-232 Control ..........................6 Serial Communication Parameters ....................4 Serial Commands ........................... 4 Troubleshooting ............................ -
Page 4: Introduction
TOSLINK for connection to an audio amplifier or other device. If no display is connected, the SP-HD-2B will emulate a display using an internal EDID, so the source will still output HDMI video, and the splitter will still be able to extract the audio signal. -
Page 5: Features
RS-232 configuration and control • Mounting brackets included • Universal power adapter • Package Contents • 1x SP-HD-2B • 1x 3-position Phoenix connector for RS-232 • 1x 5 V DC Universal locking power adapter • 2x Mounting brackets with screws •... -
Page 6: Installation
RS-232 to a PC or serial control device. • • Optionally, use the “MAX OUTPUT RES” dipswitches to downscale a 4K • image to 1080p for one or both of the displays, if needed. Hall Technologies August 7, 2023 Page 6 of 11... -
Page 7: Connectors And Indicators
Connectors & Indicators SP-HD-2B Front Name Description • Used for firmware update port SW Switch • Used for firmware update Power status Indicator LED Indicators b. HDMI IN/OUT1/OUT2: HDMI input/output detection MAC OUTPUT RES • Use DIP switches to force 1080p output when source is 4K. -
Page 8: Serial Rs-232 Control
Serial RS-232 Control The SP-HD-2B is controllable via RS-232 to change EDID and audio settings, and to query the unit’s status. Serial Communication Parameters Baud rate: 115200, Bits: 8, Parity: None, Stop bits: 1, Flow Control: None Serial Commands Each Command and Response must be terminated with a Carriage Return <CR>... -
Page 9: Troubleshooting
Troubleshooting If you are experiencing problems getting the SP-HD-2B to work properly, please use the following troubleshooting suggestions. Make sure that all of the connections are solid. Loose connections are the number one cause of • issues. Check the LEDs on the front panel. The three red LEDs indicate if the device is receiving video, if •... - Page 10 Splitter alone: 10.4 oz. (0.65 lb. or 295 g ) Package (shipping): 32 oz. (2 lb. or 920 Product Weight Vibration ISTA 1A in carton (International Safe Transit Association) Safety EMI/EMC CE, FCC Class A MYBF 90,000 hours (estimate) Warranty 3 years parts and labor Hall Technologies August 7, 2023 Page 10 of 11...
- Page 11 © Copyright 2023. Hall Technologies All rights reserved. 1234 Lakeshore Drive, Coppell, TX 75019 halltechav.com / support@halltechav.com (800)-959-6439 Hall Technologies August 7, 2023 Page 11 of 11...