Smartlogger Settings; Smartlogger - Huawei FusionSolar SUN2000 Commissioning Manual

FusionSolar Smart PV Solution-Device Replacement
Commissioning Guide

4.2 SmartLogger Settings

The SmartLogger and Smart Dongle cannot be used in the same scenario. Set the
parameters based on the actual situation.

4.2.1 SmartLogger

Setting Parameters on the WebUI
Step 1 Log in to the SmartLogger WebUI as an advanced user, special user, or admin,
and choose Maintenance > Connect Device.
Step 2 Select the replaced SUN2000 and remove it.
Figure 4-4 Removing the SUN2000
Step 3 Connect the new SUN2000 to the system.
Issue 01 (2021-04-30) Copyright © Huawei Technologies Co., Ltd.
4 Replacing the SUN2000
20