Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for studioduc juno
Summary of Contents for studioduc juno
- Page 1 ASSEMBLY INSTRUCTIONS juno crib a how-to guide that won’t leave you in tears.
- Page 2 parenting is hard. this is easy. no really, it is. MADE HERE™ MADE WELL™ MADE SAFE MADE SMART...
- Page 3 want to watch this assembly IRL? (acronym challenged? that means in real life) open the camera on your phone and place it over the QR code below to see our NYC studio dream team do all the heavy lifting (just kidding, there is none!) or go to ducducnyc.com/assembly-instructions...
- Page 4 thank you for selecting a studio duc product!
- Page 5 Please check contents against the components list in these instructions. Also, please ensure there was no damage that may have occurred in shipping. If any components are missing or you find any damage, please contact ducduc before continuing. Read all the instructions before use of the crib. Please remember to securely tighten all bolts and fasteners, and periodically check to make sure every component is properly and securely in place and all bolts and fasten- ers are tight.
- Page 6 OPERATION + MATTRESS PANEL ADJUSTMENT: The mattress height should be lowered as your baby grows to ensure that he/she does not climb out of the crib. When child is able to pull to standing position, set mattress to lowest position and remove bumper pads, large toys and other objects that could serve as steps for climbing out.
- Page 7 WARNING Failure to follow these warnings and the assembly instructions could result in serious injury or death. Read all instructions before assembling crib. KEEP INSTRUCTIONS FOR FUTURE USE. Infants can su ocate on soft bedding. Never add a pillow or comforter. Never place additional padding under infant.
- Page 8 WHAT’S IN THE BOX: B (x2) side rail A (x2) end panel mattress panel F (x4) 5/16” flat washer E (x4) mattress support bolt G (x4) D (x4) 5/16” locking washer mattress support pin...
- Page 9 WHAT YOU’LL NEED: phillips head screwdriver 15 minutes (or less) 2 people plus a dog for moral support (unless you’re a cat person)
- Page 10 Lean A against the wall. *duc insider tip* Steps in this assembly will require parts to be flat on the floor. Assemble on a soft surface to prevent any damage. Try a rug, a blanket, or even a sheet of foam from the packaging! still confused? scan this code to watch the assembly video!
- Page 11 Insert B connectors into slots on right side of A. **be sure the (4) holes are in **be sur the bottom interior position the bott when connecting both (B) parts when con to both (A) parts** to b still confused? scan this code to watch the assembly video!
- Page 12 Push B down to lock connectors into place. still confused? scan this code to watch the assembly video!
- Page 13 Repeat STEPS 2 + 3 to lock remaining part B into place. still confused? scan this code to watch the assembly video!
- Page 14 Insert the connectors on both parts B into slots on remaining part A. still confused? scan this code to watch the assembly video!
- Page 15 Push both parts B down to lock connectors into place. still confused? scan this code to watch the assembly video!
- Page 16 Insert hardware D (qty: 4) into the top hole on each side of B. Make sure hardware D is the same height on all 4 sides. *duc insider tip* If you‘re setting up the crib for a newborn, start with the mattress panel in the highest position (hardware in the top most holes).
- Page 17 Place C into the crib so each piece of hardware D is inserted into a hole. *duc insider tip* Tilt C down as shown when placing inside the crib for an easy and smooth transition. still confused? scan this code to watch the assembly video!
- Page 18 Place hardware G and F as shown in detail onto C, then screw in hardware E using a phillips head screwdriver. Repeat on all four sides. still confused? scan this code to watch the assembly video!
- Page 19 yipee! you did it! give yourself a pat on the back, take a bow, or go house a pint of ice cream…we don’t judge.
- Page 20 prefer to talk to a human instead? we’re here for you! contact our customer advocate team below 212.226.1868 quack@ducducnyc.com live chat at 200 lexington, no. 701 ducducnyc.com ny, ny 10016...
Need help?
Do you have a question about the juno and is the answer not in the manual?
Questions and answers