Shelf Placement Warning; Bulb Replacement; Ventilating Openings - Cata PR6011 XGBK Inox Operating And Maintenance Instructions Manual

SHELF PLACEMENT WARNING:

To ensure the oven shelves operate safely, correct
placement of the shelves between the side rail is
imperative. Shelves and the pan only can be used
between the first and fifth layers.
The shelves should use with the right direction, it will
ensure that during careful removal of the shelf or tray, hot
food items should not slide out.
OR

BULB REPLACEMENT

For replacement, process as follows:
1> Disconnect power from the mains outlet or switch off
the circuit breaker of the unit's mains outlet.
2> Unscrew the glass lamp cover by turning it counter-
clockwise (note, it may be stiff) and replace the bulb
with a new one of the same type.
3> Screw the glass lamp cover
back in place.
NOTE: Only use 25W/230V,
T300°C halogen lamps.
SECURING THE OVEN TO THE
CABINET
1> Fit oven into the cabinet
recess.
2> Open the oven door.
3> Secure the oven to the kitchen
cabinet with two distance
holders "A" which fit the holes
in the oven frame and fit the
two screws "B".

VENTILATING OPENINGS

When cooking is finished or in pause state or in waiting
state, if the oven's center temperature is over 75 degree,
the cooling fan will continue working for 15 minutes. Or
when the oven's center temperature becomes lower than
75 degree, the cooling fan will stop in advance.
CONNECTION OF THE OVEN
INSTALLATION
Remark:
1.
Only plus deviations are admissible for all dimension.
2.
The cabinet is not include the power switch or
socket.
NOTE: The number of accessories included depends on
the particular appliance purchased.
REMOVING THE DOOR FROM OVEN (OPTIONAL)
Disassembly of oven door
components
1.To remove the door,
open the door to the
maximum angle.Then
pull the buckle at the
door hinge backward.
2.Close the door to an
angle approximately 30°.
Hold the door with one
hand on each side.
Lift up and slowly pull t
he door out from the oven.
3.Open the door rotation
bracket assembly, refer
the action in the following
picture.
4.Lift up the door outer
glass and pull it out, then
take the door middle
glass out in the same way.
EN-6
°