Table of Contents
Advertisement
¢ Turn off the power of the unit before you connect the cable to it.
¢ The minimum radius of the cable when coiled is 25mm.
¢ Do not drop any heavy object on the cable.
¢ To disconnect the cable, pull it out by the plug. Never pull the cable itself.
¢ The optical plugs are designed to prevent connection to the optical transmission module upside down.
Whenever you plug them in, make sure they are right side up.
© Keep the surface of the terminals of the connectors clean. When they become soiled, wipe them gently
with clean tissue or cotton, moistened with ethyl alcohol. Do not use any other type of solvent except ethyl
alcohol. (Sony KK-9 cleaning kit is available.)
¢ Remove the caps of the rectangular-shaped, optical input/output connectors when you use the cable.
© When you put away the cable, do not fold nor bend it since it contains an optical fiber.
Secure with string, wire, etc.
Do not tie the cable itself.
If you have any question or problem concerning your unit, please consult your nearest Sony dealer.
Advertisement
Table of Contents
