Table of Contents
Advertisement
GETTING TO KNOW YOUR MACHINE
Control panel
QwasH
Cao
1200 0 850
\
|[GRIse
Gi 1000 Bi 450
\WQ
Beso Ono sens
\
SPIN
DRAIN START:PAUSE
1
Detergent dispenser drawer
2
Programme selector dial
3
Programme option lights
Detergent dispenser drawer
Symbols
UJ Pre-wash
lJ Wash
® Fabric softener
Programme selector dial
To select a programme depress the selector dial to
release and then turn to the required programme.
During a selected programme the programme selector
dial will remain in the same position. The programme
stage will be shown by the programme indicator lights.
To switch the machine off and to cancel a programme
already in progress turn the programme selector dial to
«OFF»,
Programme indicator lights
As the machine
progresses
through
a selected
programme each phase will be indicated ie: WASH,
RINSE, SPIN, and END.
By depressing any of the buttons the machine will
emit an audible bleep indicating that the option
selected has been accepted.
c=
4
Programme option cover
5
Programme indicator lights
6
START/PAUSE button
Programme option cover
To display the programme options depress the button
on the programme cover.
Programme option lights
The programme option lights will illuminate if the PRE-
WASH, QUICK WASH or SUPER ECONOMY options
are selected. It will also indicate the selected SPIN
PEED.
START/PAUSE button
Once a programme
has been selected
press the
START/PAUSE
button until the audible bleep stops,
then release. The programme will then commence.
NOTE: There may be a delay of up to 30 secs from
releasing the button until the programme commences
during which time the door lock light may flash.
If the machine emits 3 successive bleeps it means
that the chosen option is not compatible with the
selected programme.
Advertisement
Table of Contents
