Biostar NF500 AM2G Setup Manual page 60

NF500 AM2G / NF500 AM2L / NF500U AM2G
Integrated Peripherals
This submenu allows you to configure cert ain IDE hard drive options and
Programmed Input/ Output features.
Power Management Setup
This submenu allows you to configure the power managem ent features.
PnP/PCI Configurations
This submenu allows you to configure cert ain " Plug and Play" and PCI options.
PC Health Status
This submenu allows you to monitor the hardware o f your system.
Frequenc y/ Voltage Control
This submenu allows you to change CPU Vcore Voltage and CPU/PCI clock.
(However, we suggest you to use the default setting. Changing the voltage and
clock improperly may damage the CPU or M/B!)
Load Optimized Defaults
This selection allows you to reload the BIOS when problem occurs during
system booting sequence. These configurations are factory settings optimized
for this system. A confirmation message will be displayed before d efaults are
set.
Set Supervisor Password
Setting the supervisor password will prohibit everyone except the supervisor
from making changes using the CMOS Setup Utility. You will be prompted with
to enter a password.
4