Makita DTW1001 Instruction Manual page 2

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Fastening Standard bolt
capacities
High tensile
bolt
Square drive
Drive shank
No load speed Hard impact
(RPM) mode
Medium
impact mode
Soft impact
mode
Impacts per Hard impact
minute mode
Medium
impact mode
Soft impact
mode
Overall length
Rated voltage
For use near high-voltage
electrical power lines
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
DTW1001 DTW1001XV DTW1002
M12 - M30 (1/2" - 1-1/4")
M10 - M24 (3/8" - 1")
19 mm (3/4")
0 - 1,800 /min
0 - 2,200 /min
229 mm (9")
-
3.4 - 3.7 kg
(7.5 - 8.2 lbs)
DTW1002XV DTW1004
12.7 mm (1/2")
–
0 - 2,000 /min
0 - 1,000 /min
0 - 900 /min
0 - 2,400 /min
0 - 2,000 /min
0 - 1,800 /min
223 mm (8-3/4")
D.C. 18 V
- -
3.3 - 3.6 kg 3.1 - 3.4 kg
(7.3 - 8.0 lbs) (6.8 - 7.5 lbs)
BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH / DC18WC
2 ENGLISH
DTW1004XV DTW800 DTW800XV
M12 - M24 (1/2" - 1")
M10 - M22 (3/8" - 7/8")
–
11.1 mm (7/16") Hex.
0 - 1,800 /min
0 - 2,200 /min
229 mm (9")
-
3.5 - 3.8 kg
(7.7 - 8.4 lbs)