Chapter 3: Uefi Bios & Software; Uefi Bios Setup; Bios Update - Biostar J4105TH Manual

Hide thumbs Also See for J4105TH:

Table of Contents

• The BIOS Setup program can be used to view and change the BIOS settings for the

computer. The BIOS Setup program is accessed by pressing the <DEL> key after the

Power-On Self-Test (POST) memory test begins and before the operating system boot

begins.

• For further information of setting up the UEFI BIOS, please refer to the UEFI BIOS Manual

on our website.

The BIOS can be updated using either of the following utilities:

• BIOSTAR BIOS-FLASHER: Using this utility, the BIOS can be updated from a file on a hard

disk, a USB drive (a flash drive or a USB hard drive), or a CD-ROM.

• BIOSTAR BIOS Update Utility: It enables automated updating while in the Windows

environment. Using this utility, the BIOS can be updated from a file on a hard disk, a USB

drive (a flash drive or a USB hard drive), or a CD-ROM, or from the file location on the

Web.

BIOSTAR BIOS-FLASHER

Note

» This utility only allows storage device with FAT32/16 format and single partition.

» Shutting down or resetting the system while updating the BIOS will lead to system boot failure.

Updating BIOS with BIOSTAR BIOS-FLASHER

1. Go to the website to download the latest BIOS file for the motherboard.

2. Then, copy and save the BIOS file into a USB flash (pen) drive.(Only supported FAT/FAT32

format)

3. Insert the USB pen drive that contains the BIOS file to the USB port.

4. Power on or reset the computer and then press <F12> during the POST process.

5. After entering the POST screen, the BIOS-

FLASHER utility pops out. Choose <fs0> to search

for the BIOS file.

14 | Chapter 3: UEFI BIOS & Software

Chapter 3: UEFI BIOS & Software

Table of Contents

Chapters

Table of Contents