High Power" And Variable Power" Cooking - Tricity Bendix IM 900 Operating And Installation Instructions

"High Power" and Variable Power" Cooking
1. Touch
"CLEAR/STOP"
and a beep tone will be heard.
(This erases all previous settings and is not always
necessary).
2. Touch " 0
POWER"
and select the desired power
level by holding your finger on the "0
POWER"
pad.
To stop at the desired power level simply remove your
finger from the " 0
POWER"
pad. The lights above the
corresponding power level and below stage light "1" will
go on. "0" will appaer in the display window.
3. Touch the time on control panel to set the cooking time.
The time set will appear in the display window at the top
of the control panel.
For example:
• To set 30 seconds, touch "30sec".
• To set 3 minutes, touch "2min", and "Imin".
• To sei 10 minutes, touch "5min" and "5min" again.
4. Touch
"START".
The oven will begin cooking and the
display window will show the time counting down in
minutes and seconds. A tone will sound for 2 seconds
when the cooking is complete. The oven switches itself
off. The time of day will reappear in the display window.
NOTE:
If your wish to stir or re-arrange food during
cooking: simply open the oven door; stir or re¬
arrange; close door; touch;
"START";
and the oven
will automatically continue to count down the
remaining amount of time left on display.
Example: 900g/2 lb Fresh lamb can be
cooked quickly on
"MH"
for 20
minutes. To do this follow these 4
simple steps.
1. Touch
"CLEAR/STOP".
2. Touch" 0
POWER"
and select
Power Level.
@r
; v;;
m
,*•;
0M
MINUTES
0 0 0
SECONDS
0 0
4. Touch
"START".
The oven will begin cooking and
the display window will show the
time counting down in minutes and
seconds. A tone will sound for 2
seconds when the cooking is
complete. The oven switches itself
off. The time of day will reappear in
the display window.
m
MINUTES
000
SECONDS
0 0
8