Programmed Defrost - Tricity Bendix IM 900 Operating And Installation Instructions

Table of Contents

Advertisement

Programmed Defrost
This special setting has been designed to cut down
defrosting time. The oven operates on
"H"
(HIGH) for the
beginning of the chosen time and at
"ML"
for the remaining
period of time.
.
1. Touch
"CLEAR/STOP"
and a beep tone will be heard.
(This erases all previous settings and is not always
necessary).
2. Touch " (jf)
DEFROST"
The lights below " g)" and "1"
will go on. "0" will show in the display window
3. Touch time key(s) for defrosting time.
(See "Programmed Defrost" chart for timings).
4. Touch
"START".
The oven will begin defrosting and the
display window will show the time counting down in
minutes and seconds. A tone will sound for 2 seconds
when the defrosting has finished. The oven switches
itself off. The time of day will reappear in the display
window.
Example: To defost 450g/1 lb minced beef using the
programmed defost cycle for 7 minutes.
1. Touch
"CLEAR/STOP".
2. Touch
"(3 DEFROST".
3. Set 7 minutes by touching "5min"
and "2min" "7.00" will show in the
display window.
n**b*zxw \
t j
MINUTES
iGrEKD
SECONDS
0 0
4. Touch
"START".
The oven will begin
defosting and the display window
will show the time counting down in
minutes and seconds. A tone will
sound for 2 seconds when the
defrosting has completed. The oven
switches itself off. The time of day
will reappear in the display window.
MINUTES
0 0 0
13

Advertisement

Table of Contents
loading

Table of Contents