Something Not Working - Tricity Bendix TM 551 Operating & Installation Instructions Manual

SOMETHING NOT WORKING
Before contacting your local Tricity Bendix Service Force please carry out the following checks.
SYMPTOM SOLUTION
♦ The machine does not work
♦ Check that there is a supply of electricity
♦ Check the plug fuse
♦ Check the door is closed
♦ Check the machine is switched on
♦ Check the time selector dial is set correctly
♦ The clothes are not dry after normal drying
time
♦ Check you have used the correct temperature
setting)
♦ Check the timer has not been set within a cool
down period
♦ The heater cut-out has operated. See below
Heater Cut-Out
This cut-out operates if the airflow is severely
restricted. Before resetting it check:
4 The filter is clean.
4 The air inlets at the back are not blocked.
♦ There are no other restrictions.
Reset the cut-out on the rear of the dryer by
pushing the red button.
If the cut-out continues to operate after checking
the above points you should contact Tricity Bendix
Service Force.
8