Download Print this page

Tricity Bendix TM 220 W Operating & Installation Instructions Manual: Maintenance And Cleaning; External Cleaning; Cleaning The Door; Cleaning The Filter; Troubleshooting; Something Not Working

Tricity bendix tumble dryer tm 220 operating & installation instructions.
Hide thumbs


Maintenance and Cleaning

You must disconnect the appliance from the electricity
supply, before you can carry out any cleaning or
maintenance work.

External cleaning

Use only soap and water and then dry thoroughly.
From time to time, apply a little wax furniture cream with
a soft cloth.
Important: do not use methylated spirit, diluents or
similar products.

Cleaning the door

Something Not Working

Before contacting your local Tricity Bendix
Service Centre, please make the following
The dryer does not start up
The door is open
The plug is not fitted into the wall socket
There is no electricity supply from the wall socket
The time selector dial is not set correctly
The dryer does not dry properly
The filter is clogged
Insufficient drying time
Excessive laundry load
The dryer is not correctly installed
Service & Spare Parts
In the event of your appliance requiring service, or if you
wish to purchase spare parts, please contact your local
Tricity Bendix Service Force Centre by telephoning:
0870 5 929929
Clean periodically the
interior part of the door to
remove any fluff.
Accurate cleaning ensures
correct drying.

Cleaning the filter

Your dryer will only function well if the filter is clean.
The filter collects all the «fluff" which accumulates
during drying and it must therefore be cleaned at the end
of each programme with a damp cloth.
The filter cannot be removed.
It is perfectly normal for fluff to accumulate in the filter
during drying. In fact, even fabrics dried in the open air
lose their fibres, but we do not notice it.
Your telephone call will be automatically routed to the
Service Force Centre covering your post code area.
For the address of your local Service Force Centre and
further information about Service Force, please visit the
website at
Before calling out an engineer, please ensure you have
read the details under the heading "Something Not
When you contact the Service Force Centre you will need
to give the following details:
1. Your name, address and post code
2. Your telephone number
3. Clear and concise details of fault
4. The model and serial number of the appliance (found on
the rating plate - see picture).
5. The purchase date


   Also See for Tricity Bendix TM 220 W

   Related Manuals for Tricity Bendix TM 220 W

Comments to this Manuals

Symbols: 0
Latest comments: